Products

Small Tonnage Conventional Presses

C type frame structure and most conventional press.
Possible to manufacture various types of plastic forming parts applying tooling die technology with progressive processing or transfer processing.
Compare to exclusive press machines, there are couple limitations such as line s.p.m, drawing depth and, b.d.c. accuracy.

Single Crank Gap Frame Press, NC1-E Series

Single crank gap frame press, NC1-E series

  • The highly rigid frame construction minimizes the frame gap opening caused by elongation and deformation of the frame when press is loaded.
  • When the press is overloaded, AIDA hydraulic overload protector of a metal seal system, which is peculiar to AIDA is actuated instantly, and the slide is stopped immediately in a state no load.
  • Merely returning the slide to top dead center resets the state overload automatically.
  • MPC (Multiprocessing press controller) is mounted.

Double Crank Gap Frame Press, NC2-E Series

Double Crank Gap Frame Press, NC2-E Series

  • A highly rigid frame and counter rotating gear mechanism for eccentric loads.
  • A minimal overall clearance has been accomplished by doing high precision machining on each structural part. Thereby breakthrough is minimized while greatly increasing die life and decreasing noise and vibration.
  • NC2-E series, our best selling high precision Hy-flex press demonstrates its utility from transfer presswork to progressive presswork to satisfy your high precision and high productivity needs.

Straightside Frame Single Crank Press, NS1 Series

Straightside Frame Single Crank Press, NS1 Series

  • The elimination of angular deflection and the addition of many new features have raised this from a general purpose press to a machine that provides a high level of dynamic accuracy and functionality resulting in improved productivity.
  • Slide guides at center and fully lengthened.

Straightside Frame Double Crank Press, NS2 Series

Straightside Frame Double Crank Press, NS2 Series

  • A unitized straight side frame for minimal frame elongation. (Up to 250t, 300t: The frame assembly construction tightened by tie rod bolts)
  • Popular link motion feature available.
  • Full-Length slide guides.
  • Forced circulation lubrication system applied.
  • Compact design, Energy efficient.

Direct Servo Formers DSF-C1-A Series

Direct Servo Formers DSF-C1-A Series

  • The Next Evolution in Direct Servo Formers
  • This newly evolved machine has been streamlined and its functionality has been further bolstered to provide the productivity, operability and energy savings that only an AIDA servo press can deliver.

Direct Servo Formers DSF-N1-A Series

Direct Servo Formers DSF-N1-A Series

  • Highly rigid straight side frame type
  • This presses enable high value-added forming by meeting wide variety of demands of customers such as single operations,progressive die operations and tandem press operations.

Direct Servo Formers DSF-N2 Series

Direct Servo Formers DSF-N2 Series

  • AIDA's unique high-torque, low RPM servomotor is connected directly to the driveshaft. Achieving high-precision and high value-added forming.
Copyright(c) WISMA INTERNATIONAL LTD. All rights reserved.